Sawhorses for small boat building
Before heading to the boat-build in Mystic, CT last month, my son and I made two sawhorses that we sized and designed to be useful in building small boats. We used the Chesapeake Light Craft (CLC) design from their website here: http://www.clcboats.com/shoptips/stitch_glue/sawhorses_slings.html
Below is an overview sketch from CLC:
Below is a photo of one of the completed “horses” in use during our build at Mystic:
They are made from basic lumber-yard 2×4 material and they are mortise-and-tenoned together for strength. The tops are removable so that you can just screw the strongback right onto the hoses as above and not worry about them being “sacraficial”….just replace the tops after they get too chewed up. I am going to make the sling accessory as described on the CLC website for them so that I can now use them to gently hold the finished boat for servicing, etc.
Matt Sanfilippo is the Chief Partnership Officer (CPO) for the College of Engineering at Carnegie Mellon University (CMU) and Co-Director of its Engineering Research Accelerator. In this role, Matt coordinates and enables strategic and sponsored research opportunities across the college, and stewards the development of proposals for major research opportunities along strategic themes. Additionally, he enables collaboration among the college's research institute/center executive directors, and industrial and government relations personnel in the pursuit of opportunities with industry, federal and state governments. Before becoming CPO for the College, Matt was the Senior Executive Director for Research Initiatives, the Executive Director of CMU's SII (Smart Infrastructure Institute) and ICES (Institute for Complex Engineered Systems), and Associate Director of PITA (Pennsylvania Infrastructure Technology Alliance) and RAMP (Research for Advanced Manufacturing in Pennsylvania).
Before CMU, Matt was Managing Director of Applied Technology for Michael Baker Corporation, an engineering and energy services firm. Matt managed Baker's technology division including Geographic Information System (GIS), software and web development, multimedia, virtual reality, visualization, Global Positioning System (GPS), mapping and surveying services. Before joining Baker, Matt was an Innovation Director for Redleaf Group, a Venture Capital/Operating Company focused on information security, supply chain and mobility solutions. While at Redleaf, Matt managed technical due diligence for seed-stage investments and coordinated relationships between Redleaf and their partner companies. Prior to Redleaf, Matt was CIO of GZA GeoEnvironmental Technologies, an infrastructure engineering firm, and operations manager for their Internet start-up that focused on web-technologies for health and safety and manufacturing metrics.
Matt is on the board of Larson Design Group (LDG), past Chairman of the Board for the Pittsburgh Botanic Garden, current board member of the Pittsburgh History and Landmarks Foundation (PHLF), current Vice President of the Sewickley Heights Gun Club (SHGC) and former member of the Information Sciences and Technology Advisory Board for the Pennsylvania State University Beaver. Matt is also former Vice President of the Pittsburgh Chapter of the Association of Internet Professionals and former Vice President of the Board of Trustees for Baker Combined Charity of Pennsylvania.
Posted on July 22, 2011, in Kayaks & Boats, Woodworking. Bookmark the permalink. 1 Comment.
Pingback: My modifications to CLC sawhorse design for light watercraft « A Learning Adventure in the Workshop